Easy module
BOMBANANA Cable Solver
Choose the number of cables and the bulb color to find the target cable. Add the cable colors from left to right to get the exact position to cut.
What do you have?
Choose the cable count and the bulb color to get the target cable.
How the Cable module works
- 01Count the cablesCheck whether the module has three or four cables.
- 02Read the bulb colorThe cable count and the bulb color decide the target cable color.
- 03Cut the matching cableFind that color among the cables and cut it.
Enter the cable colors from left to right above and the solver turns the target color into a specific cable.
Cable quick reference
All 8 combinations: 4 bulb colors × 3 and 4 cables.
| Bulb | 3 cables | 4 cables |
|---|---|---|
| Red | Blue | Green |
| Blue | Green | Yellow |
| Green | Yellow | Red |
| Yellow | Red | Blue |
Bulbs down the side, cable count across the top.
Use number + color when calling the cut
- 01
Call the two clues
Say the cable count and then the bulb color: “Three cables, yellow bulb.”
- 02
Read the cables left to right
If your team has the order, say it the way it sits on the module: “Blue, red, green.”
- 03
Answer with the number and the color
Give both: “Cut cable two — red.” A color on its own can be cut twice.
The whole exchange
Clues in, answer out. Read the cables left to right if your team has the order, and say the number with the color so the player at the panel does not have to guess which cable you meant.
- Clues
- 3 · Yellow
- Cables, left to right
- Blue · Red · Green
- Answer
- Cut cable two, red.
Common Cable mistakes
Mixing up the bulb and the cable color
The bulb color is the clue. The target color is the cable to cut.
Using the 3-cable rule for 4 cables
The target changes with the cable count.
Calling out only the color
Include the cable number too: “Cable two, red.”
Entering the cables in the wrong order
Always enter and call them from left to right.
Want the Cable manual instead?
Open the Cable section of the manual if you want to use the lookup table without the solver.
Cable FAQ
What information do I need for the Cable solver?
The cable count and the bulb color. Add the cable colors if you want the exact cable position.
Does the target change with the number of cables?
Yes. Three-cable and four-cable modules use different target colors.
Should I cut the bulb color?
Not necessarily. The bulb color is used to look up the target cable color.
Why should I enter the cable colors from left to right?
It lets the solver turn the target color into a specific cable number.